Pacific Navigator photo

Pacific Navigator

Hull Specifications

Pacific Navigator technical drawing
Length: 7.5 m / 24' 9"
Beam: 2.6 m / 102"
Side: 92.7cm x 3.175mm / 36.5" x .125" (5052-H32)
Btm Width: 213.36 cm x 4.83 mm / 84" x .190" (5086-H116)
Dry Weight: 1262.35 kg / 2783 lbs
Deadrise: Bow 34°, Forward 28°, Transom 18°
Fuel Cap: 246.1 L / 65 USG diurnal fuel system
Max HP: 224 kw / 300 HP
Max Cap: 8 person or 1320lb, (600 kg)
2800lb (1270kg) motor, persons, gear
Pacific Navigator technical drawing
Length: 8.15 m / 26'9"
Beam: 2.6 m / 102"
Side: 92.7cm x 3.175mm / 36.5" x .125" (5052-H32))
Btm Width: 213.36 cm x 4.83mm / 84" x .190" (5086-H116)
Dry Weight: 1363.05 kg / 3005lbs.
Deadrise: Bow: 34° Forward: 28° Transom: 18°
Fuel Cap: 246.1 L / 65 USG diurnal fuel system
Max HP: 261kw / 350 HP
Max Cap: 9 person or 1485lb, (600kg)
3100lb (1406kg) motor, persons, gear

Standard Features

  • 25″ Single engine offshore bracket with integral bottom sheet & swim platform Extruded chine, toe rail, keel strip & gunwale
  • Full reverse chine bottom design
  • 5 piece welded, walkthrough windshield with grab handles
  • Recessed self bailing diamond tread bow
  • 3″ polished bow & stern rails w/downrigger brackets
  • Bow storage (Room for 2nd battery)
  • Passenger console tray w/grab handle
  • Fishermen’s transom with livewell, self draining utility area, 2 piece cutting board
  • hatch lid and framed rigging access panels
  • Side storage trays with gunwale rod racks- 2 per side
  • Offshore bracket w/welded swim platform style trolling motor bracket Welded double bow eye
  • 2 – welded stern eyes
  • 5 – 8″ welded cleats
  • Pressure tested subfloor fuel cell – diurnal system compliant
  • Sound deadening foam package
  • Transducer brackets
  • Under floor aft storage compartment
  • Bow box
  • Integrated offshore bracket w/3 step boarding ladder & grab handle
  • Choice of standard paint colors
  • Top, 1/2 side and deck paint
  • Side stripes & vinyl graphics
  • Granite color paint on gunwales
  • Zinc anodes
  • Stainless steel thru-hull fittings below waterline w/seacock valves
  • Choice of grey or tan interior package
  • Carpeted sidewalls & side tray/storage boxes
  • Vinyl covered marine grade plywood floors and kick panels Stainless steel cup holders
  • Netted Storage
  • Heavy duty convertible top with side curtains, backdrop Severe duty mariner seats w/swivels
  • 37″ Rear bench seats w/back rest
  • Locking glove box
  • Rear transom storage
  • Navigation and anchor lights
  • Full gauge instrumentation package w/12 volt outlet and USB port Stainless steel marine horn
  • Fuel / water separator
  • Rear livewell
  • Bilge pump
  • Hydraulic steering
  • Driver windshield wiper
  • Single Battery Switch only (No Battery)

“My family is always happy when we're on the water in our "Scarlet”. We make great memories every trip. We get compliments all the time at the boat launch about how great our boat looks. We spend just as much time in her on the driveway telling stories as we do in the water. Already peeking at the Offshore series...”

– DJ H., Richmond, BC

Deadrise Defined

Deadrise schematic

Take the guesswork out of selecting the right hull design. Duckworth Boats provide three points of measurement on the hull. Each angle is engineered for optimal performance.