200 Pacific Navigator photo

200 Pacific Navigator

Hull Specifications

200 Pacific Navigator technical drawing
Length: 6.71m / 22'
Beam: 2.6 m / 102"
Side: 91.44 cm x 3.16 mm /36" x .125" (5052-H32)
Btm Width: 213.36 cm x 4.83 mm / 84" x .190" (5086-H116)
Dry Weight: 975 kg / 2148 lbs
Deadrise: Bow 34°, Forward 28°, Transom 18°
Fuel Cap: 234.7 L / 65 USG diurnal fuel system
Max HP: 187 kw / 250 HP
Max Cap: 7 person or 1155lb, 525 kg
2450lb (1111kg) motor, persons, gear

Standard Features

  • 25” Single engine offshore bracket with integral bottom sheet & swim platform
  • Extruded chine, toe rail, keel strip & gunwale
  • Full reverse chine bottom design
  • 3 piece welded, walkthrough windshield with grab handles
  • Recessed self bailing diamond tread bow
  • 3” polished bow & stern rails w/downrigger brackets
  • Bow storage (room for 2nd battery)
  • Passenger console tray w/grab handle
  • Fishermen’s transom with fish box, self draining utility area, 2 piece cutting board hatch lid and framed rigging access panels
  • Side storage trays with gunwale rod racks- 2 per side
  • Offshore bracket w/ welded swim platform style troll bracket
  • Welded double bow eye
  • 2 – welded stern eyes
  • 5 – 8” welded cleats
  • Pressure tested subfloor fuel cell – diurnal system compliant
  • Sound deadening foam package
  • Tranducer brackets
  • Under floor aft storage compartment
  • Bow box
  • Integrated offshore bracket w/3 step boarding ladder & grab handle
  • Flat bow for electric troll motor placement
  • Choice of standard paint colors
  • Top, 1/2 side and deck paint
  • Side stripes & vinyl graphics
  • Zinc anodes
  • Stainless steel thru-hull fittings below waterline w/seacock valves
  • Carpeted sidewalls & side tray/storage boxes
  • Choice of slate or sandstone interior package
  • Marine grade plywood floors
  • Choice of vinyl or carpeted floors
  • Stainless steel cup holders
  • Netted storage
  • Heavy duty convertible top with side curtains, backdrop, & boot
  • Deluxe captain seats w/arm rests & HD adjustable pedestal bases
  • 37” Rear storage bench seats
  • Locking glove box
  • Locking rear transom storage
  • Forward dual battery tray
  • Aft sub floor storage
  • Navigation and anchor lights
  • Full gauge instrumentation package w/12 volt outlet and USB port
  • Stainless steel marine horn
  • Fuel / water separator
  • 1250 gph bilge pump
  • Bow mounted quick-connect for electric troll motor
  • Rear livewell w/recirc, dual pumps
  • Bow livewell w/recirc, dual pumps
  • Driver side windshield wiper
  • Hydraulic steering
  • Single Battery Switch only (No Battery)

“Light weight, durable, beautiful! This boat turns heads at the boat launch.”

– Pam & Chuck A. , Spokane Valley, WA

Deadrise Defined

Deadrise schematic

Take the guesswork out of selecting the right hull design. Duckworth Boats provide three points of measurement on the hull. Each angle is engineered for optimal performance.