215/215SE Pacific Navigator photo

215/215SE Pacific Navigator

Hull Specifications

215/215SE Pacific Navigator technical drawing
Length: 7.19 m / 23' 6"
Beam: 2.6 m / 102"
Side: 91.44 cm x 3.16 mm /36" x .125" (5052-H32)
Btm Width: 213.36 cm x 4.83 mm / 84" x .190" (5086-H116)
Dry Weight: 1076 kg / 2370 lbs
Deadrise: Bow 34°, Forward 28°, Transom 18°
Fuel Cap: 234.7 L / 65 USG diurnal fuel system
Max HP: 224 kw / 300 HP
Max Cap: 8 person or 1320 lb, 600 kg
2800 lb (1270 kg) motor, persons, gear
Performance
Bulletins:
250HP Mercury Verado (PDF)

215/215SE Pacific Navigator technical drawing
Length: 7.19 m / 23' 6"
Beam: 2.6 m / 102"
Side: 91.44 cm x 3.16 mm /36" x .125" (5052-H32)
Btm Width: 213.36 cm x 4.83 mm / 84" x .190" (5086-H116)
Dry Weight: 1030 kg / 2270 lbs
Deadrise: Bow 34°, Forward 28°, Transom 18°
Fuel Cap: 234.7 L / 65 USG diurnal fuel system
Max HP: 224 kw / 300 HP
Max Cap: 8 person or 1320 lb, 600 kg
2800 lb (1270 kg) motor, persons, gear

Standard Features

  • 25″ Single engine offshore bracket with integral bottom sheet & swim platform
  • Extruded chine, toe rail, keel strip & gunwale
  • Full reverse chine bottom design
  • 3 piece welded, walkthrough windshield with grab handles
  • Recessed self bailing diamond tread bow
  • 3″ Bow & stern rails w/ downrigger brackets
  • Bow storage (room for 2nd battery)
  • Passenger console tray w/ grab handle
  • Fishermen’s transom with fish box, self draining utility area, 2 piece cutting board hatch lid and framed rigging access panels
  • Side storage trays with gunwale rod racks- 2 per side
  • Offshore bracket w/ welded swim platform style troll bracket
  • Welded double bow eye
  • 2 – welded stern eyes
  • 5 – 8″ welded cleats
  • Pressure tested subfloor fuel cell – diurnal system compliant
  • Sound deadening foam package
  • Tranducer brackets
  • Under floor aft storage compartment
  • Bow box
  • Integrated offshore bracket w/ 2 step boarding ladder & grab handle
  • Flat bow for electric troll motor placement
  • Choice of standard paint colors
  • Top, 1/2 side and deck paint
  • Side stripes & vinyl graphics
  • Zinc anodes
  • Stainless steel thru-hull fittings below waterline w/ seacock valves
  • Carpeted sidewalls & side tray/storage boxes (215)
  • Choice of slate or sandstone interior package(215)
  • Marine grade plywood floors
  • Choice of vinyl or carpeted floors
  • Stainless steel cup holders
  • Netted Storage
  • Heavy duty convertible top with side curtains, backdrop, & boot
  • Deluxe Captain Seats on HD adjustable pedestal bases
  • 37” rear storage bench seats (215)
  • Locking glove box
  • Locking rear transom storage
  • Forward dual battery tray
  • Navigation and anchor lights
  • Full gauge instrumentation package w/12 volt outlet and USB port
  • Stainless steel marine horn
  • Fuel / water separator
  • 1250 gph bilge pump
  • Quick connect for electric troll motor
  • Rear livewell w/recirc, dual pumps
  • Bow livewell w/recirc, dual pumps
  • Driver side windshield wiper
  • Silver Steer hydraulic steering
  • Bow Electric Plug-In
  • Isolator battery switch (no battery)

“It’s a very well constructed boat, specially designed for fishing. As a welder and welding inspector, I am very impressed with the quality of workmanship. I wish I could use it more, but there is no water where I live and the closest boat ramp is 124 miles away.”

– George S. , Pahrump, NV

Deadrise Defined

Deadrise schematic

Take the guesswork out of selecting the right hull design. Duckworth Boats provide three points of measurement on the hull. Each angle is engineered for optimal performance.